Original Vontron ULP-1812-75 RO Membrane (75GPD)
Brief Introduction
ULP series of ultra-low pressure aromatic polyamide compound membrane elements newly developed by Vontron Technology Co. can operate under ultra low pressure to reach as high a permeate flow and salt rejection as regular low-pressure membrane elements and are applicable to the desalination of surface water and underground water. They operate at approximately 2 thirds of the operating pressure of regular low-pressure composite membranes and can achieve a salt rejection rate of up to 99.5%, which can decrease the investment costs for such relevant components as pumps, piping, and vessels, etc. including the operating cost for the RO system, thus increasing the economic efficiency. Being suitable for the desalting of water sources with salt concentrations lower than 2,000 ppm, such as surface water, underground water etc., ULP series of membrane elements are mainly used for applications such as pure water production, boiler water replenishment, foodstuff processing, and pharmaceutical production.
Key Features and Specifications:
- Compatible with standard housings membranes 1812, 2012
- Porosity: 0.0001 microns
- Spiral wound with tape outer wrap
- The average yield of permeate: 75 GPD (0.38 m 3 / day)
- Supply dry cell (without liquid preservative)
- Porosity: 0.0001 microns
- The diameter of the coil element 2 “(46 mm)
- The length of the rod 12 “(305mm)
- Operating pressure: 60 psi
- Max. operating pressure: 300 psi (2.07 Mpa)
- Max. incoming water temperature: 45 ℃
- Average rejection: 95%
- Certified to NSF/ANSI 58
Free Delivery all over Pakistan (Cash on Delivery)
Reviews
There are no reviews yet.